6 LEDs per Pixel, 10 Pixels per Metre

       1.Input Voltage DC24V, Single signal (data) control.

2. External UC2904/TM1814 IC control, every six LEDs are programmable.
3. 60leds/m or 72leds/m, RGB+3000K,RGB+4200K,RGB+6000K available.
4. 100mm/3.93″,83.3mm/3.28″ intervals cutting point
5. White PCB/Black PCB available. IP30/IP65/IP67/IP68 is available.
6. Both ends wired with 150mm/5.9″ 20Awg wire and JST 3Pin male/female connector
7. 3M adhesive tape sticks on the back of the non-waterproof version.
8. Controller System：SD controller , DMX controller , Arnet

We have 20 in stock.  

• RGBW digital addressable LED
• Environmental protection & energy saving
• High brightness & good consistency
• Splash & Knock Proof PU Coating

A smart LED control circuit and light-emitting circuit in one LED package. Each lighting element is a pixel and the output is driven by patented PWM technology, which guarantees high color consistency across all pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.  

The LED has a low drive voltage which allows for environmental protection and energy-saving, high brightness,  good consistency, low power, and long life. 

The drive IC is the well-proven UCS2904. It has a standard 3 line construction – +ve, data, and -ve. It is packaged inside the 5050SMD LED Chip meaning that each LED can be a different color and programmed individually. This LED strip is also IP65 PU Coated which means it is splash-proof and knock-proof, giving you that extra layer of protection. 

Priced per meter and sold in a continuous run when purchasing multiple meters.

If power and data are connected at one end, end the longest single recommended run length is 8m – if additional power is provided at the end of the strip, then the recommended maximum is 16m – the data signal is only required at one end

AGRIPPA Solder-Free Connectors Available

Easy To Install

Fully Dimmable With The Correct Controls

.