5M RGB LED Strip – WS2812B 30 Per Meter – White Strip – Weatherproof

-Programmable led strip lights

This 5-meter roll has 60 LEDs & 36LED per meter on a white-colored strip.

This is a roll of addressable (TM1923) RGB LEDs. The LEDs are factory-calibrated to ensure you have consistent colors all the way along your strip.

The RGB addressable led strip is weather-sealed in a flexible plastic jacket (easily removed, if desired) and terminated at each end with a 3-pin plug, and two additional power leads if high current is required.

Long strips can require a lot of currents! Make sure you’re using a power supply that is capable of running your project. We’ve listed the maximum current that these LEDs consume (full-brightness white) but for a typical, colorful display the current required is usually a lot lower. If you decide to go with a smaller power supply, experiment with the length of strip you need to find out its true current requirements. 

For those of you who are looking to plug multiple of these strips together, we have these 3-pin Pigtail Connectors.

Overview

• Brand: MSH LED 
• Manufacturer: MSH LED Lighting
• Package Dimensions: 46*46.5*26cm
• Number of Lights: 300
• Voltage: 24 Volts
• IC: TM1923
• Controller Required?: No
• Type of Bulb: SMD5050 RGB LED
• Item Weight: 310 g

• 5 meters LED Strip only 1 x 5 Meter LED Strip only (300leds), no power adaptor. If need to light up and control the LED Strip, another DC24V power adaptor. Please refer to 5 meters kits (That kit include 5meters LED Strip, 1 x DC24V Power adaptor) ;
• No need for a Controller, It is automatic self-control.
• 24V Power Adaptor 24V power adapter directly, easy and convenient.
• InstallationStrong 3M adhesive tape on the backside of PCB for installation.

【24V Addressable LED Strip】Dream Color SMD 5050 RGB LED Strip 60LEDs/m, Each 5cm (3LEDs) could be cut, with digital IC TM1923 to realize color changing, chasing, flashing, running, etc., Fascinating, Dynamic, Wonderful lighting, Much better lighting effects than regular RGB LED Tape. Non-waterproof IP20 for indoor and dry environments using only. 

【24V Power Adaptor】The LED Strip voltage is DC24V, the 24V power adapter with DC connector could be easily and conveniently connected with the magic controller. 

【How to install】Strong 3M adhesive tape on the backside of PCB for installation. 

【How to light up】3 steps to light up the led strip: 1st, 24V power adapter connect with a magic controller with DC connector, and Magic Controller connect with the dream color LED Strip with a connector on the box. 2nd, Power Adapter to be powered on ; 

【5 meters LED Strip package】 > 1 x 5 Meter LED Strip only ; > If need to light up and control the LED Strip, another DC24V power adaptor and digital RGB led strip controller must be ; > Please refer to 5 meters kits (which include 5 meters LED Strip, 1 x DC24V Power adaptor.