Overview  

Come in 5-meter reels, 12V DC input, 20 DMX512 IC, and 60 pcs  SMD5050  RGB LED per meter. Each 3-LED segment can be cut

We have 4 different 12 Volt Digital RGB LED Strip Light Kits that can control each 4″ section of 3 LEDs. Our basic kits have pre-programmed controllers that have built-in lighting scenes or you can purchase a DMX kit to control the LED strips by DMX control. Each 4″ section of 3 LEDs can be individually addressed for amazing lighting effects. We also have a Dream LED Strip with a built-in controller. Most of the strips are UL recognized, all are RoHs and CE approved.

Must be equipped with a controller and 12V power supply to work!

Voltage: DC12V,

Power: 14W/m,

Luminous angle: 120,

Number of light: 60LEDs/m,

Size: 60 segments per meter, board width 10MM, thickness 3MM

Number of pixel points: 20pixels /m

Display color: full color

Lamp bead type: 5050RGB

Control mode: 512

Data transmission rate: 800K/S

Display gray level: 256

Line board color: white/black

Operating temperature: -40℃~80℃

Service life: 30Kh 

 Product Description.

1, this product is a full-color DMX512 external control soft light bar, every three lamp beads for a pixel point.

2, any one of the points is bad and does not affect the signal transmission, the points below the bad point normal use.

3, directly controlled by the controller of the DMX512 signal, receiving the console does not require decoding diagrams.

4, control of a single light running, flowing, open windows, meteor chasing, chasing, animation, video, text and other fancy changes. Any color can be displayed, any combination can be displayed, the easiest combination into any pattern especially made into a light bar screen to use.

5, any two-pixel transmission distance of 5 meters (the specific transmission distance to the site signal line and environmental interference varies).

6, the signal is a serial single-wire cascade interface, through a signal line for transmission.

7, PWM console can be adjusted to 256 gray levels, a total of 16777216 total luminescent colors can be adjusted.

8, when the refresh rate of 30 frames/second, the high-speed mode cascade number does not exceed 512 points.

The DMX  led strip lights to have rich and vivid colors, high visibility, and are more visually attractive. It is widely used in wall corridors, indoor environment decoration, product model lighting decoration, game machine lighting decoration, speaker lighting decoration, entertainment venues, liquor cabinet bar backlight, ceiling backlight, LED light box light source, LED luminous sign, aquarium supplies, car decoration, etc. It is a new generation of lighting light that replaces traditional neon lights, fluorescent lamps, and tubes.

1、City outline lighting including building, advertising wall, signboard, Christmas landscape, and other decorations.

2, irregular design body decoration such as hotels, nightclubs, KTV, and other places of polygonal walls, water drops, and ceiling cove design.

3, home concealed groove edging such as door frames, bar, wine cooler, closet, TV cabinet, etc.

4、Car beauty such as car body, car bottom.

Installation methods.

1, indoor installation: Best led strip lights for indoor installation is relatively simple because it does not have to withstand the wind and rain. Installation can be directly torn off the 3M double-sided adhesive surface sticker on the back of the strip, and then the strip is fixed in the place where it needs to be installed according to the flat on it. If you meet the corner of the strip is too long and too short, the LED strip can be cut or welded at any point in each group with the scissors logo cut line alone.

2, outdoor installation: outdoor installation because it will be subject to wind and rain, can not be fixed with 3M adhesive, so outdoor installation often use the slot fixed way, the need to cut and connect the place, the same method, and indoor installation, but need to be equipped with additional waterproof adhesive, to consolidate the waterproof effect of the connection point