Overview

Create a new world of light in a simple way with an APA102C led strip.

• This digital led strip has 144 pcs 5050 RGB LED per meter
• 144Pixels per meter, SPI control, 3LEDs per section
• Can be cut every 100mm, white & black PCB board are available
• 1+1 Ounce copper FPC, 5 m per reel, the 3M tape is included
• JST SM connector on each side, DC5V constant voltage operation
• Silicon coating, silicon tube housing, silicone injection waterproof
• Control IC included supporting numerous color-change effects,
• Control by SD controller, Arduino, DMX512, Artnet,
• Flexible PCB 5V low voltage input,
• Absolutely addressable, each IC built inside RGB LED,
• 1M per roll, Customer’s size available also,
• PCB color: White & Black available for choose,
• The non-waterproof version strip attached white color 3M tape on the backside of the PCB but the waterproof version only included 5pcs silicon clips and screws for installation use(without 3M tape).
  Each LED is cut-able.

Strict Quality Assurance.

1: Striplight Any quality issue occurs within 365 days, with a free replacement service and no need to return defective products

2: Striplight extended period to 730 days, please contact me via the contact information on the card. (Whatsapp+8613267109053)

You can contact me at any time in any of the above three situations, or if you have good suggestions and ideas, you can contact me. Customer service will reply within 12 hours and solve the problem for you, I look forward to your message

Precautions

• Using voltage DC5V, higher than 5V will destroy it.
• If you need better-led strip performance, you can use an Android/IOS Bluetooth controller SP105E&SP110E, music controller CSY08&SP107E, WiFi controller SP108E, Alexa controller SP501E, or a programmable controller K-1000C. It also works with the Amazon Alexa controller.
• It is better to add DC5V voltage every 3.3FT because the LEDs at the far end of the strip might be dimmer due to the added resistance and voltage drop that occurs as the current flows to that end of the strip.
• The LED strip is made by 50cm FPCB, so there is a solder point each 50cm(1.6FT) on the strip. But this minor flaw has no bad effect on the strip’s performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths.

Package Detail:

1x 3 pin male connector for connector controller.
200x 16.4 ft APA102C 144LED strip, Box Size: 42.5*40*26cm, Weight is 13kg/box.