• Light source: 5050 RGB LED
• LED Qty: 144pcs per meter  60pcs per meter  30pcs per meter
• Wave length (NM): R,650nm ; G,520nm ; B,460nm
• Color order: RGB
• The gray level: 256
• Color: full color (24-bit )
• View angle: 120°
• Voltage: DC12V
• Power:0.1W~0.3W/LED Total :15W~43W (Not a fixed value)
• Waterproof: IP30/IP65/IP67.There is no double side tape on IP67.
• Double side tape: IP30/IP65
• Recommend Power Supply: 12V4A 48W
• FPCB board color: Black/White
• Dimension: 1000x12x2.13mm
• Life span: ≥50000hrs
• Light up 1 color（red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED
• Backup Data. Signal break-point continuous transmission. If one of the LEDs is damaged, the following LEDs still work well.
• Maximum White Brightness Without Voltage Drop. The installation is more convenient. If the length is 32ft, please add voltage DC12V every 16ft.
• DC12V RGB Individually Addressable . Every LED is programmable . WS2815 IC chip .When you use SP110E ,SP105E,SP107E,SP108E,K-1000C etc SP controller , you can select WS2811 IC chip for this LED strip.
• High-quality LED. Pure gold wires, Copper stent， Ultar bright.

Create a new world of light in a simple way with a WS2815 led strip.

• • This is a new chip again from the world semi family, based on WS2812B and WS2813, To solve the chip breakdown and Strip’s Voltagedrop, now we welcome WS2815.
  • The Flex is 30/60/144 Pixel/ LED per meter, and 5 m in a roll we provide a black and white color board, same as our other addressable tapes, it’s cut-able per unit LED with a large soldering Pad which makes it easy to re-solder again.
  • the PCB printed +12V DI, BI, GND, both DI, and BI means signal but it’s only required to link the DI cable to your controller.
  • Can be cut every 100mm, white & black PCB board are available
  • 3Ounce copper FPC, 5 m per reel, the 3M tape is included, Customer’s size available also,
  • JST SM connector on each side, DC12V constant voltage operation
  • Silicon coating, silicon tube housing, silicone injection waterproof
  • Control IC included supporting numerous color-change effects,
  • Control by SD controller, Arduino, DMX512, Artnet,
  • Absolutely addressable, each IC built inside RGB LED,
  • The non-waterproof version strip attached white color 3M tape on the backside of the PCB but the waterproof version only included 5pcs silicon clips and screws for installation use(without 3M tape).
    Each LED cut-able.

Waterproof Level

1. IP30: Non-waterproof. Only work indoor.
2. IP65: Silicone Coating Splash Proof.Dust prevention splash proofing designs. Only work indoor.
3. IP67: Cheating Waterproof. Dust prevention of waterproofing designs. Can work outdoor but the 3 PIN connectors are non-waterproof.
4. IP68:Glue-Pouring Waterproof.Dust prevention of waterproofing designs. Can work underwater.3 PIN waterproof connector. IP68 needs to be customized.
5. If you want to install our LED strip on the eaves, we recommend you customize IP68.

This is our recommended SPI and Programmable controller link. We are a professional lighting system company, you can tell us your lighting project requirements, we will recommend the most reasonable lighting solutions for you. If you need a customized lighting scheme, please feel free to contact me.

Strict Quality Assurance.

1: Striplight Any quality issue occurs within 365 days, with a free replacement service and no need to return defective products

2: Striplight extended period to 730 days, please contact me via the contact information on the card.(Whatsapp+8613267109053)

You can contact me at any time in any of the above three situations, or if you have good suggestions and ideas, you can contact me. Customer service will reply within 12 hours and solve the problem for you, I look forward to your message

Package Detail:

1x 4 pin male connector for connector controller.
200x 16.4 ft WS2815 300 LED strip, Box Size: 42.5*40*26cm, Weight is 13kg/box.