Overview

1. 12V TM1814 RGBW 60 Leds pixel strip
2. DC12V, 12W/M
3. 10mm width White /Black FPCB
4. 6 LEDs per segment on a 10mm width PCB board
5. 60 pcs RGBW LED plus 20 pcs TM1814 IC chip
6. 3pin JST-SM connector
7. 3M adhesive tape on the backside of the non-waterproof tape
8. Support K-1000C/ K-8000C/ YM-501 /DMX512 control/MADRIX NEBULA,Artnet
9. Product Size

More Details.

1. This addressable led strip RGBW is 12V TM1814  4 channel RGBW 60 led digital strips that are different from DMX512 RGBW led pixel strips. Actually, the protocol is compatible with SK6812 RGBW led tape.
2. Compared to the integrated SK6812 RGBW ones, this external IC chip 12V TM1814 RGBW 60 LED strip has much higher brightness and stability.
3. Its advantage is this TM1814 RGBW digital led strip can play pure white color compared to that classical WS2811 RGB led strip couldn’t.
4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose from.
5. The entire strip has 10 pixels ( 40 channels), and 60 pcs RGBW LEDs in a meter with a 10mm width PCB board.
6. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut lines every 3 LED. Solder to the 0.1″ copper pads and you’re good to go.
7. If the 12V TM1814 RGBW pixel led strip does get damaged, it is often a one-pixel copper unit broken, in such a case, cutting off this copper unit segment and resoldering the rest copper units together brings the strip back to life.

Product features

1. Six light beads are one pixel, and one meter has 10-pixel points
2. Each pixel is 256 gray levels
3. Unique design of FPC circuit board without hole drip glue does not leak glue, the board is simple and not easy to fail
4. Using the back sticky adhesive installation, simple and convenient
5. Both ends of the humanized reserved joints, are better and more convenient to use
6. The product luminous brightness exceeds the highest of similar lamp beads now

Control principle: an IC control three LEDs to form a circuit (a group), and the controller through the control IC controls the circuit inside the FPCB, so as to control the LED strip change different effects; such as flashing, chase, jumping change, clockwise running horse, counterclockwise running horse, monochrome running horse, color-changing running horse, single chase from beginning to end, flowing water, simulated lightning, etc.; the change of this light strip Effect is not limited to the current controller built-in 128 kinds of effects, according to customer needs, their own preparation; arranged in the form of the screen can be displayed, text, letters, pictures, animation, etc.

8, environmental protection and safety: the use of high-quality high bright SMD 5050 LED. with small power consumption, generates little heat, no glare, impact resistance, and other characteristics. Low voltage DC 12V power supply, high safety, and reliability.

9, colorful and diverse can be adjusted according to customer needs through the controller arbitrarily.

10, long life: the average life of 50,000 hours.

11, cutting, welding convenient and free: each group of LED can form a circuit and can be cut off and welded along the above cut line at will to meet the needs of customers required by the length of various light bars.

12, soft: the use of a soft FPCB board as the substrate, can be docked, bent, cut, and fixed at will on the concave and convex surface.

13, light, thin: suitable for installation in narrow spaces.

TM1814 led strip Application

1, Car decoration, lighting signs, advertising signs, and other indoor/outdoor decorations.
2, medium and high-end stores, shopping malls, and another indoor commercial atmosphere lighting.
3, entertainment venues, beauty salon lighting.
4, Atmosphere lighting for bars, cafes, and other leisure places.
5, For path and outline signs, luminous signboards, etc.

Common effects

Overall jump; overall gradient; previously stacked; two closed screens; cross closed screen; without grayscale forward chase; without grayscale backward chase; with grayscale forward chase; with grayscale backward chase; forward drift; backward drift and other effects, through the programmable controller to achieve any effect.

Installation tips

Power + controller + light bar
1. first of all, identify the direction: each section of the light bar has some small arrows, the arrow points to the direction of the output, indicating that the signal is transmitted forward; the direction of the tail of the arrow is the input, the wiring direction for our link signal;
2. each volume of light bar input (that is, the light bar in the direction of the arrow at the end of the forefront) is a three-color (red, green, and white) plug connector with a two-color (red and black) line.
The three-color connector (red, green, and white) is connected to the controller.
Red – positive vacant not connected (or connected to the power supply on the positive 12V power +)
green – the signal connected to the controller above the output port is usually: DAT
White – ground to the controller above the ground terminal (also known as the 12V negative) usually: GND or COM
Two-color connector (red and black) connected to the power supply.
Red – positive 12V power transformer above the positive terminal is usually: +V
White – negative 12V power transformer above the negative terminal is usually: -V or COM
When wiring, please ask professionals to connect, or professionals on the side to guide the operation, remember to be careful of electric shock