Connecting your LED strip lights to Tuya SmartLife can be done using one of the three methods described below, focusing on the Tuya WB5 5-in-1 LED controller:

1. Long Press the Match Key on the Controller

This method is the most straightforward and reliable. It uses the match button on the Tuya controller to connect the lights to your phone.

Step-by-step guide:

1. Connect the controller to the LED strip and power both devices.
2. If you are using a WB5 5-in-1 controller, switch to the correct mode for your LED strip type (DIM, CCT, RGB, RGBW, RGBCCT). Short press the match button to change the mode. The indicator color represents the strip type: White for single color, Yellow for CCT, Red for RGB, Green for RGBW, and Blue for RGBCCT.
3. Open the Tuya/SmartLife app and click “Add Device.”
4. Press and hold the match button for 3 seconds or more until the indicator flashes.
5. Add the LED controller device in the app and connect.

2. Find Devices Automatically by Switching Power On/Off

If your controller doesn’t have a match button, you can use the power cycling method.

Step-by-step guide:

1. Turn on the power and ensure the LED strip and controller are working properly.
2. Switch the output mode to match the LED strip type (if necessary).
3. Turn the power on and off four times in quick succession: Off – On (1) – Off – On (2) – Off – On (3) – Off – On (4). This will cause the strip to flash, indicating it’s in pairing mode.
4. Open the Tuya/SmartLife app and click “Add Device.”

3. Add Devices Manually by Switching Power On/Off

This manual method allows you to connect the device by resetting it with the power supply.

Step-by-step guide:

1. Connect the light strip, controller, and power supply. Ensure the light is on.
2. Switch the output mode if needed.
3. Plug and unplug the power supply four times: Off – On (1) – Off – On (2) – Off – On (3) – Off – On (4). The indicator should flash red, indicating the controller is in pairing mode.
4. Open the app, select “Add Device” → “Lighting” → “Strip Lights (WiFi),” connect to your network, and follow the steps to pair.

Frequently Asked Questions

Why does WB5 need to press the match button to switch modes?
The WB5 5-in-1 controller has five output modes (DIM, CCT, RGB, RGBW, RGBCCT). You need to match the correct mode to the LED strip type before pairing to ensure compatibility.

Why can’t I connect my light strip after following the steps?
If previous pairing attempts failed, reset the controller by holding the match button for 10 seconds to clear any previous configurations. Also, check the wiring, ensure there are no short circuits, and verify proper power injection.

These methods should help you successfully connect your LED strip lights to the Tuya SmartLife app!